value. You must contact your supplier to obtain a LAT key. After you set the
key, your system administrator must reboot the Annex.
Type
Annex
Values
obtained from your supplier
Default n/a
Lists
Annex Only, LAT
lat_multicast_timer
defines the number of seconds that can elapse between service
announcement transmissions for the LAT protocol.
Type
Annex
Values
10 through 180 seconds
Default 30 seconds
Lists
Annex Only, LAT
llat_sys_location
supplies host location or identification information for the LAT protocol.
Type
Annex
Values
0 to 32 characters
Default " "
Lists
Annex Only, LAT
lat_queue_max
limits the number of HIC (Host Initiated Connection) requests that an Annex
can queue.
Type
Annex
Values
0 to 255
Default 4
Lists
Annex Only, LAT
latb_enable
allows an Annex to decode a LAT host's data-b packets, which change
asynchronous port parameters. Refer to your LAT host's documentation
for details.
CSMIM/Micro-CS Management Application Guide
If you enter
enabled
message requesting that flow control (XON/XOFF) be
turned off, the Annex turns off flow control and passes
and the LAT host sends a data-b slot
19-51