Cabletron Systems CSMIM-T1 Administrator's Manual page 190

Chapter 14 Viewing, Creating, and Executing Scripts
All Async Port Parameters
asynchronous port parameters.
All Printer Port Parameters
port parameters.
All Enet Port Parameters
parameters.
All DS0 Channel Parameters
DS0 Channel parameters.
All DS1 Line Parameters
parameters.
Parameters
cannot use other check buttons.
After you select options,
selected parameters that require port or channel information, the
window appears first, followed by the
Entry
detailed information about these windows, see Creating a Script in this
chapter.
Reading the Message Box
The window's message box includes the status and error
Create Script
messages that result from the script creation process. After you complete
the port entry window and/or the file selection window, this message box
monitors Annex Manager's script creation process. The box displays:
The
Creating script...
is active.
The
Script creation complete
has taken place.
Error messages. If your selections contain parameters that
are not eligible for scripts, or that do not exist, the message
box informs you about error conditions. For more information,
see Identifying Errors in this chapter.
14-8
creates a script from the Annex's
creates a script from the Annex's printer
creates a script from the Annex's Ethernet
creates a script from the Annex's T1
creates a script from the Annex's DS1
You can select any combination of
All Async Port Parameters
,
Parameters All DS0 Channel Parameters
. If you select
Main Window Parameters
Create Script
status message, indicating that processing
CSMIM/Micro-CS Management Application Guide
,
All Printer Port Parameters
may display a second window. If you
Script File Selection
message, indicating that the process
All Annex Only Parameters
,
All Enet
, and
All DS1 Port
or
All Parameters
Script Port
window. For
,
, you