Table of Contents
Advertisement
Chapter 4
Using the Main Window
In the configuration area, you choose the parameter groups or
lists you will use for the Annexes you selected. This area
appears only in Customize mode.
The information required in the specification and configuration areas
depends on the command you choose. When you complete required
information, you can use Setup windows and other Annex Manager
commands.
information. In Setup mode, you must close all other Setup
windows before you can return to the main window.
Using the Specification Area
The main window's specification area stores an Annex list. Annex
Manager's configuration and status commands work for the Annexes that
appear on the list.
Understanding the Automatic Annex List
When you start Annex Manager, the software finds all available Annexes
on your local network and places them in the main window's Annex List
box with their hardware types.
Annex Manager displays a new window over the main window to inform
you that the automatic discovery process is taking place.
4-4
The main window displays at all times when you use
Annex Manager. In Customize mode, you can return to
this window at any time to change list or parameter
To disable this process, type
load Annex Manager (e.g., type
CSMIM/Micro-CS Management Application Guide
argument when you
-nod
).
gui_am -nod
Advertisement
Table of Contents
