Cabletron Systems CSMIM-T1 Administrator's Manual page 179

1 Complete the main window and choose
2 Enter port information in the fields below the
If your selections in the main window require port or channel
information you must enter a port type and a port or channel
number.
3 Choose
The
Work Area
The
Message Box
step if you do not want to see current values.
The
Dsp Diffs
channels you selected do not have the same parameter value.
You can press this button to display a window showing the
parameter's value for each Annex and port.
This window, which contains values for all parameters that have
the
Dsp Diffs
selected. You can use scroll bars to view other parameter
values.
4 Click the check button ( ) or drag the cursor through a range of
check buttons for each parameter you want to change.
CSMIM/Micro-CS Management Application Guide
.
Show Values
displays values for the parameters you selected.
lists each parameter name. You can skip this
button indicates that the Annexes, ports, or
Figure 13-3. Differing Values Window
button, scrolls automatically to the parameter you
Changing Parameter Values
.
Set
Work Area
.
13-11