Table of Contents
Advertisement
Chapter 16
Booting and Resetting Annexes
Pref Dump Addr
current image. You can use this field only when you select the
option.
Dump
Load Dump Gateway
Annex uses when it loads or dumps an image to a host located
on a different network or subnetwork.
Boot Time
occur. You can use this field only when you select the
option. You can enter a time in HH:MM format, or you can enter
a plus sign (+) followed by a time in HH:MM format to indicate
an amount of time in the future.
Boot Image
code that will be loaded. If you change the
that the new image is appropriate for the Annex types you
select. If you do not specify an image name, each Annex you
selected will boot using the current default image for that
Annex.
Boot Message
boot message. The text you enter displays on every terminal
connected to the Annexes you select for booting. You cannot
use this field if you selected the
A single Annex,
Two or more Annexes with the same preferred load and dump
address and default image,
image.
Two or more Annexes with different default values for load or
dump addresses and images,
informing you about this condition and leaves the fields blank.
If you leave these fields blank,
Preferred Load Address
Annex you selected.
16-4
accepts the address to which
accepts the address of a gateway that an
lets you enter the time at which the boot operation will
accepts the path and file name for the operational
allows you to add your own text to the standard
The
Preferred Load Address
fields use the default addresses and image. If you
Image
select:
displays the default addresses and image.
Boot
,
Preferred Dump Address
CSMIM/Micro-CS Management Application Guide
Boot Image
option.
Quiet
,
Preferred Dump Address
displays these addresses and
Boot
displays a warning message
Boot
uses the default value for
Boot
and
will dump the
Boot
Delayed
, be sure
, and
Boot
for each
Boot Image
Advertisement
Table of Contents
