Cabletron Systems CSMIM-T1 Administrator's Manual page 108

Chapter 6 Selecting General Settings
Broadcast On and OFF determine whether or not an Annex
broadcasts for a DHCP server if the preferred DHCP servers
are not available.
The
The box defines a type of name service and host addresses:
Nameserver
Preferred Service
Nameserver
ien_116.
Alternate Service
Nameserver
and host when the service specified in the
is not available.You can select
Preferred Host
selected.
Alternate Host
selected.
The box controls the time server host:
Time
lists the IP address that an Annex queries for time service.
Host
You can enter:
A loopback address (127.0.0.1) to disable time service
queries.
A host address to send queries to a specific host.
A broadcast address to send queries to a specific network or
networks instead of sending a general broadcast to all
networks.
0.0.0.0 to direct the Annex to query the boot host.
The box specifies a log host for the Annexes you selected:
Logging
contains an IP address for the host that logs Annex
Host
messages. If you enter
messages.
The
Software Options
selected:
6-6
The DHCP fields are optional and may be 0.0.0.0. When
enabled, the client broadcasts DHCP messages.
button activates the ACP security server.
On
defines the type of name service used with the
box's
Preferred Host
defines the type of name service used with the
box's
Alternate Host
contains a host address for the
contains a host address for the
0.0.0.0
box lists the options you can use on the Annexes you
CSMIM/Micro-CS Management Application Guide
field. You can select
field. The Annex uses this service
Preferred Service
, , or
none dns ien_116.
, the Annex broadcasts its log
, , or
none dns
field
you
Preferred Service
you
Alternate Service