Table of Contents
Advertisement
A separate section for each Annex you selected. In
Figure 13-1, a line of asterisks separates information about
two Annexes.
All parameters included in a group or all parameters you
selected.
Parameters in groups display in the order in which they
appear in the group. If you choose a parameter that
requires port or channel information and you enter more
than one port number, the output box displays a separate
line for each port or channel.
Parameters you select from the parameter lists appear in
alphabetical order.
If Annex Manager cannot process the
selections in the main window, or if your choices are not valid for all the
Annexes you selected, a warning window displays. For example, a warning
window appears if you entered a port type that does not match the group
you select or a port number that does not exist on the Annex you select.
For more information about warning and error messages, see Identifying
Errors on page 13-13.
Using Push Buttons
provides push buttons at the bottom of the window:
Show
Apply
selections in the main window and on the
Clear
Save Output
includes the default text directory. You can enter a file name in
the
Selection
window's output box, or press
Show
window.
Show
Help
Close
CSMIM/Micro-CS Management Application Guide
activates the
Show
removes current output from the window.
displays the standard
field and press
displays a window that explains the
removes the
Show
Viewing Parameter Values
command based on your
Show
command based on your
Verbose Output
window, which
File Selection
to store the contents of the
OK
Cancel
window from your display.
button.
to return to the
command.
Show
13-5
Advertisement
Table of Contents
