Using Fields, Buttons, And Boxes; Using Text Fields - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 2 Window Basics
The option moves any Annex Manager window to the back of your
Lower
desktop. When you use this option on overlapping windows, the window
in the foreground moves, revealing the window that was covered.
Using the Lower Option
To change the display:
1 Select the window you want to move.
2 Select
Lower
Using the Close Option
The option appears only in the Annex Manager main window. This
Close
option allows you to exit Annex Manager software. While this option is
available, you should always use the Annex Manager
menu.

Using Fields, Buttons, and Boxes

Text fields, buttons, and boxes allow you to select or enter information in
an Annex Manager window. This section explains how you can recognize
these elements and gives you directions for using each one.

Using Text Fields

A text field contains a single piece of information displayed in a box. For
example, the main window provides text fields for Annex names,
passwords, and port numbers. Some text fields allow you to enter or change
values; others simply display information.
Entering Text Field Information
The cursor appears in a text field when you can enter or change the field's
value. To use a text field:
1 Place the pointer in the field and click the mouse button.
The border of the field is highlighted and the cursor blinks.
2-12
and click the mouse button.
If you position a window so that it is partially visible, you
can click anywhere on its border to bring it to the
foreground.
CSMIM/Micro-CS Management Application Guide
entry in the main
Exit