Table of Contents
Advertisement
you might enter
ports 1 through 3 and port 8. In addition, you can enter
When you use
Understanding the Port Totals Box
Annex Async Port Status
boxes. The
Port Totals
from the time the Annex was last booted or reset. This box includes the
following fields:
Num Ports
the Annex you selected.
Input Chars
Output Chars
Parity Errors
Overrun Errors
Framing Errors
detected.
Understanding the Port Information Box
The
Port Information
field. This box includes the following categories:
Async Port(s)
Port Number
appears on a separate line.
In Flow State
field displays:
, flow control is allowed.
Go
Stop
None
Unknown
Out Flow State
If the field displays:
, flow control is allowed.
Go
CSMIM/Micro-CS Management Application Guide
Displaying Asynchronous Port Status Information
,
,
to specify three ports, or
1
3
8
Apply
displays information in the
box gives you statistics for all asynchronous ports
displays the total number of asynchronous ports on
shows the total number of characters received.
lists the total number of characters transmitted.
indicates the total number of parity errors detected.
displays the total number of overrun errors.
displays the total number of framing errors
box displays statistics for each port you entered in the
shows the port numbers you entered. Each number
shows the current status of input flow control. If the
, flow control is not allowed.
, flow control is not applicable for this port.
, the flow control status cannot be identified.
indicates the current status of output flow control.
, port statistics appear.
Port Totals
to specify
1-3, 8
.
all
and
Port Information
17-7
Advertisement
Table of Contents
