Cabletron Systems CSMIM-T1 Administrator's Manual page 387

number in
load_dump_sequence
parameter's value overrides values in
Type Async
Values IP address
Default 0.0.0.0
Lists Async Port, SLIP
slip_mtu_size
sets the maximum transmission unit (MTU) size on a SLIP/CSLIP port. This
parameter forces the SLIP interface to use large (1006) or small (256)
MTUs.
Type Async
Values large or small
Default small
Lists Async Port, SLIP
slip_no_icmp
discards ICMP packets directed to the SLIP link. This parameter allows the
Annex to reduce unnecessary traffic and messages over the SLIP link.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, SLIP
slip_ppp_security
controls dial-up SLIP/PPP access. When
are set to
enabled
security server. The Annex determines whether CLI users are authorized
to execute SLIP or PPP commands.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP, Security
CSMIM/Micro-CS Management Application Guide
, you must enter a valid address here. This
, ports configured for SLIP and PPP will use the ACP
and
pref_load_addr
enable_security
.
pref_dump_addr
and
slip_ppp_security
19-87