Cabletron Systems CSMIM-T1 Administrator's Manual page 304

Chapter 19 Annex Parameters
access information. If you choose
security.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, AppleTalk
attn _ string
defines a control character sequence that returns users to the CLI prompt.
Users can define a temporary control character sequence using the CLI
command.
stty attn
Type Async
Value
Ctrl
Default " " (null string) or
Async Port, Command LIne Editing, Modem, Modem
Lists
Internal
authoritative_agent
allows an Annex to send an ICMP Address Mask reply to a host that
broadcasts a subnet mask request.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Basic Annex
authorized_groups
specifies the LAT protocol remote group codes that are accessible to users
on an Annex port. You can enter
by commas (e.g.,
(e.g.,
1, 5, 200-255
Type Async
Values all, none, numbers between 0 and 255
Default none
Lists Async Port, LAT
autobaud
controls whether line speed is determined automatically when a connection
is opened. If you choose
19-4
+ any character, up to 16 characters
, , ) or a range of numbers separated by dashes
1 5 7
).
, the modem or terminal connecting to an
enabled
CSMIM/Micro-CS Management Application Guide
, the Annex uses only local
disabled
+
(for vcli connections)
Ctrl A
, , a series of numbers separated
all none