Chapter 4
Using the Main Window
Verifying Annex Status
Because an Annex list can contain Annexes or other devices that are not
reachable, you may want to verify the status of these items.
Verifying Status
To verify information about an Annex list device or to change the list:
1
Select one or more items from the Annex list box.
2
Select
Verify Annex State
If you select an Annex whose status has changed from
NOT REACHABLE,
message. If you select a device that is now reachable but is
not an Annex, Annex Manager removes it from the list.
If an Annex has the
it using an invalid
, Annex Manager attempts to connect using the original
again
string. If this string differs from the one currently displayed in
4-10
Figure 4-7. Annex Info Window
from the Status menu.
the Annex's type replaces the original
NOT REACHABLE
string, and you use
Community
CSMIM/Micro-CS Management Application Guide
status because you added
Verify Annex State