Cabletron Systems CSMIM-T1 Administrator's Manual page 320

Chapter 19 Annex Parameters
CallDef_map_to_lower
allows an ISDN Primary Rate Annex to convert uppercase characters
received from a terminal using CLI into lowercase characters. This
parameter is used for older terminals that do not support lower case
characters.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_map_to_lower
allows an ISDN Primary Rate Annex to convert lowercase characters sent
to a terminal using CLI into uppercase characters. This parameter is used
for older terminals that do not support lower case characters.
Type Async
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_max_sessions
specifies the maximum number of concurrent ISDN Primary Rate Annex
connections. You can enter
Type Annex
Values -1 to 16
Default 3
Lists Annex Only, Basic Async Port, Call Defaults
CallDef_metric
defines the hop count to the remote end of the connection when
is set to or
slip ppp
ISDN Primary Rate Annex to use a route other than the SLIP or PPP
interfaces to the remote end.
Type Annex
Values 1 to 15
Default 1
Lists Annex Only, PPP, SLIP, Call Defaults
19-20
to indicate that there is no maximum set.
-1
. You should modify this parameter only if you want the
CSMIM/Micro-CS Management Application Guide
CallDef_mode