Cabletron Systems CSMIM-T1 Administrator's Manual page 318

Chapter 19 Annex Parameters
packets. The Annex does not check incoming packets for the presence of
the IPSO.
Type Annex
Values none, secret, topsecret, confidential, unclassified
Default none
Lists Annex Only, Call Defaults, Security
CallDef_ipx_security
controls whether IPX security is enabled for incoming calls.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Security
CallDef_ixany_flow_
control
treats any input character as a start (XON) character if output has been
suspended by a stop (XOFF) character.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, Flow Control
CallDef_latb_enable
allows an ISDN Primary Rate Annex to decode a LAT host's data-b packets,
which change asynchronous call parameters. Refer to your LAT host's
documentation for details.
XON/XOFF characters to the host. This scenario can adversely
affect XON/XOFF and the terminal's cursor keys.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, LAT
19-18
If you enter
enabled
message requesting that flow control (XON/XOFF) be
turned off, the Annex turns off flow control and passes
CSMIM/Micro-CS Management Application Guide
and the LAT host sends a data-b slot