Cabletron Systems CSMIM-T1 Administrator's Manual page 398

Chapter 19 Annex Parameters
tni_ones_density
disables the T1 engine's built-in ones density monitor. When you select
, this monitor provides the network with the correct number of pulses.
enabled
You should select enabled here when you set the
.
ami
Type T1 DS1
Values enabled or disabled
Default disabled
Lists T1_DS1
toggle_output
defines the character that flushes the output buffer for CLI users.
Type Async
Values
Ctrl
Default
Ctrl
Lists Async Port, Command Line Editing
vci_autobaud
indicates whether the Annex automatically detects line speed when a
connection is opened and whether it sets matching terminal port
characteristics on the next login. This parameter works only when the
DECServer command interface is configured (i.e., when
). For more information, please refer to the CSMIM/MicroCS Interface
to
vci
for VMS Environments Administrator's Guide .
Type Async
Values enabled or disabled
Default disabled
Lists Async Port
vci_login_port_
password
enables the port password when the DECServer command interface is
configured (i.e., when
19-98
+ any character
+ O
(displays as ^O)
is set to
cli_interface
CSMIM/Micro-CS Management Application Guide
tni_line_code
). For more information, please
vci
parameter to
is set
cli_interface