Cabletron Systems CSMIM-T1 Administrator's Manual page 116

Chapter 7 Setting Asynchronous Port Values
ARAP
interface using ARAP.
IPX
Telnet
command. You can specify the host and arguments in the
Rlogin/Telnet
SLIP
interface using SLIP.
CLI
modem access to the Annex Command Line Interface
(CLI). CLI provides access to the network and connections
to other hosts via the telnet, connect, rlogin, and tn3270
commands.
Dedicated
defined in the
there, you can choose whether the port will communicate
via telnet or rlogin.
NDP
and routing.
Rlogin
command. You can specify the host and arguments in the
Rlogin/Telnet
Other
currently use modes that differ from the options displayed
in the
Manager's Customize mode to check these values, or you
can select another option here. You cannot select the
button.
7-6
specifies that a port can perform as a network
allows dial-in Novell access with the Fastened II client.
automatically connects a user to a host via the telnet
box's
Argument
specifies that a port can perform as a network
allows a port connected to a terminal or incoming
automatically connects a user with the host
Dedicated
allows dial-in with authentication by Novell, dial-out,
automatically connects a user to a host via the rlogin
box's
Argument
indicates that one or more Annexes you selected
box. You can use the
Mode
If you select
Annex Manager does not allow an Annex to
determine modem speed automatically. If you
select ,
Serial CLI
Annexes you chose are set to select modem speed
automatically, Annex Manager does not change this
condition.
CSMIM/Micro-CS Management Application Guide
field.
box. Once you enter a host address
field.
Set
,
Autodetect PPP
, , ,
Telnet Dedicated
command in Annex
, , , or
ARAP IPX
, or and the
NDP Rlogin
Other
,
SLIP