Comparing Parameters And Values - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 15 Comparing and Copying Parameters and Values
Save Output
includes the default text directory. You can enter a file name in
the
Selection
output box or press
Help
Close

Comparing Parameters and Values

Using the Compare Command
To use the
Compare
1 Select
Compare
The
Compare
2 Select the
The list boxes and fields change depending on the option you
choose (see Using List Boxes, the Port Type Button, and Fields
earlier in this chapter). If you select
choose a
3 Choose an Annex from each
If your list has one Annex, you do not need to select it. If you
want to compare two ports on the same Annex, select the same
Annex in both list boxes.
4 Select one port type and a port number for each Annex List.
If you selected the
type that matches the parameters you selected. For all other
Compare Options
If you selected the same Annex in both list boxes, you must
select different port numbers here. If you select
displays automatically; you cannot change this number.
15-8
displays the standard
field and press
Cancel
displays a window explaining
removes
Compare
command:
from the Configure menu.
window displays (see Figure 15-1).
you need.
Compare Option
from the main window.
Parameter Option
If you select
to step 3. If you select
3 and 4 and go to step 5.
Annex vs. Annex
, you can select only the appropriate port type.
CSMIM/Micro-CS Management Application Guide
File Selection
to store the contents of the
OK
to return to the
Compare
from your display.
Annex vs. Annex
or
Annex vs. Annex
Script vs. Script
box that displays.
Annex List
option, you must select a port
window, which
window.
Compare
.
, you must
, go
Annex vs. Script
, skip steps
,
DS1 Line 2