Table of Contents
Advertisement
Chapter 19
Annex Parameters
tni_circuit_id
contains the transmission vendor's circuit identifier used for customer
service calls.
Type
T1 DS1
Values
0 to 128 characters
Default " "
Lists
T1_DS1
tni_clock
defines the transmit clock for the T1 Network Interface. You can select:
looptiming
clock.
localtiming
throughtiming
interface as the transmit clock.
Type
T1 DS1
Values
looptiming, localtiming, throughtiming
Default looptiming
Lists
T1_DS1
tni_esf_fdl
defines the protocol used by the telephone company to read the statistics
maintained by an Annex and perform diagnostic tests. You can select
, or
.
att, ansi
other
Type
T1 DS1, PRI
Values
none, att, ansi, or other
Default att
Lists
T1_DS1, PRI Line
tni_framing
selects the superframe format used on the T1 Network Interface. Your
selection must match the format supplied by the telephone company.
Type
T1 DS1
Values
esf, d4
Default esf
Lists
T1_DS1
19-96
to use the recovered receive clock at the transmit
to use the local clock as the transmit clock.
to use the recovered receive clock from the other
CSMIM/Micro-CS Management Application Guide
none,
Advertisement
Table of Contents
