Table of Contents
Advertisement
Chapter 3 Working with Annex Manager Windows
User-defined Parameter Groups
and store them as a group.
Site Parameters
values that display in Help messages and in the
command.
SNMP Information
single Annex.
Confirm Auto Reset
requires you to verify a reset procedure for the
Execute Script
default turns it on) you must respond to the window that
appears before Annex Manager will change a
configuration. If you do not select this option, the reset
procedure occurs automatically.
The
Status
current Annex, port, and interface information:
Annex Status
Async Port
asynchronous ports.
Interface
Annex's interfaces.
PRI
Annexes.
displays basic statistics about T1 ports.
T1
DVS
Verify Annex State
The
Mode
Using Secondary Windows
An Annex Manager's secondary window appears when a command
requires information that its window does not accommodate. For example,
if you create a new script, the
path and file name that will store the script.
3-4
lets you change your site's parameter default
displays basic SNMP information about a
determines whether Annex Manager
commands. If you choose this option, (the
heading provides access to commands that give you
displays basic information about an Annex.
displays basic information about one or more
allows you to view current information about an
provides basic information about ISDN Primary Rate
provides information for all active tunnel interfaces.
checks system information for Annexes
menu lets you choose
File Selection
CSMIM/Micro-CS Management Application Guide
allows you to select parameters
or
Setup
Customize
window allows you to specify a
Show
,
and
Set
Copy
modes.
Advertisement
Table of Contents
