Cabletron Systems CSMIM-T1 Administrator's Manual page 372

Chapter 19 Annex Parameters
Type Async
Values chap, pap, chap/pap, none
Default none
Lists Async Port, PPP, Security
ppp_username_remote
contains the username by which the Annex identifies itself when the remote
PPP peer asks for authentication.
Type Async
Values 0 to 15 characters
Default " " (null string)
Lists Async Port, Basic Annex, PPP, Security
pref_DHCP1_addr
contains the IP address of the DHCP server that the client attempts to use
as the primary source for DHCP services. When enabled, the client
broadcasts DHCP messages.
Type Annex
Values IP Address
Default n/a
Lists Annex Only
pref_DHCP2_addr
contains the IP address of the DHCP server that the client attempts to use
as the backup source for DHCP services when the primary DHCP server
does not respond. When enabled, the client broadcasts DHCP messages.
Type Annex
Values IP Address
Default n/a
Lists Annex Only
pref_dump_addr
contains an IP address for the preferred dump host. This is the host to
which the Annex first tries to dump.
Type Annex
Value IP address
Default 0.0.0.0
Lists Annex Only, Basic Annex
19-72 CSMIM/Micro-CS Management Application Guide