Displaying the User Defined Parameter Groups Window
Displaying the Window
The
User Defined Parameter Groups
you enter in the main window. To display the window:
1
Move the pointer to the Options menu and choose
Parameter Groups
The
User Defined Parameter Groups
12-1).
The example below shows the User-defined Parameter Groups window.
Figure 12-1. User Defined Parameter Groups Window
Understanding the User Defined Parameter Groups
Window Format
The
User Defined Parameter Groups
a parameter list, a work area, and push buttons. This section explains each
area in the window.
CSMIM/Micro-CS Management Application Guide
command does not depend on information
.
window consists of a parameter group list,
Creating Parameter Groups
window appears (see Figure
User Defined
12-3