Cabletron Systems CSMIM-T1 Administrator's Manual page 119

Remote Address
other end of the serial line if the Annex does not obtain the
address from the
Subnet Mask
initial display is based on the network portion of the
Annex's IP address.
The
address from a host-based server. The
buttons are used in conjunction with the
Remote Address
CSMIM/Micro-CS Management Application Guide
contains the IP address for the port at the
acp_dialup
contains the Annex's IP subnet mask. This field's
Entering an incorrect Subnet Mask can cause
routing problems.
Address Assignment
fields:
If you select the
searches the
acp_dialup
name and sets local and remote addresses and
subnet mask.
If the file contains a matching user name and:
The local and remote addresses exist in the
file, the Annex uses those values.
acp_dialup
The
acp_dialup
not a local address, the Annex uses the remote
address from the file and the Annex's IP address
for the local address.
If the file does not contain a matching user name, the
Annex uses values from the
and fields:
Subnet Mask
If both fields contain addresses, the Annex uses
these values.
If both fields are set to
for both addresses with the remote PPP client.
The connection is denied for a remote SLIP client.
If the file contains a local address and the remote
address is set to
address and negotiates with the remote PPP client for
Using the Edit Async Ports Window
file.
box allows an Annex to request an
button, the Annex
Security Server
file for the remote client's user
file contains a remote address but
Local Address, Remote Address,
, the Annex negotiates
0.0.0.0
, the Annex uses the local
0.0.0.0
Address Assignment
and
Local Address
7-9