Table of Contents
Advertisement
Chapter 15
Comparing and Copying Parameters and Values
The
Copy From
main window. You can select a single Annex from this list. If
you need to add an Annex to the list, you can return to the main
window and reissue the
The
Copy To
box, and allows you to return to the main window to add an
Annex as well. In this window, however, you can select more
than one Annex. If you intend to copy port parameter values
from one port to another on the same Annex, you need to select
the same Annex in both boxes.
Selecting Port Types
The port type button defines the kind of port parameters that will be copied.
All Annexes involved in the copy process must use the same port type.
This button displays based on the
screen. If you select:
Main Window Params
the parameter group or list you chose. For example, if you use
a group that includes asynchronous ports and you select
printer ports here, the copy command displays a warning and
will not use all asynchronous parameters. For more
information, refer to Identifying Errors in this chapter.
Annex Only Params
cannot change port parameters.
DS1 Line Params
automatically, as does port
information.
Async Port Params
corresponding option displays automatically. You cannot
change the port type button.
Entering Port Numbers
The two port number fields list the ports involved in the copy process. You
can enter one port number in the left-hand field for the Annex from which
you are copying values, and one or more numbers (or a range of numbers)
in the right-hand field for the Annex to which you are copying values.
15-12
box displays the Annex list you created in the
Copy
box displays the same list as does the
Copy Option
, you can select the appropriate port type for
, you cannot use the port button or fields. You
, the corresponding option displays
,
Printer Port Params
CSMIM/Micro-CS Management Application Guide
command.
you select at the top of the
. You cannot change this
2
, or
Enet Params
Copy From
, the
Advertisement
Table of Contents
