Table of Contents
Advertisement
Chapter 4
Using the Main Window
Selecting Items in Lists
Selecting an Annex
Many Annex Manager commands require you to select Annexes from the
main window's list. To select one or more Annexes:
1
Create an Annex list.
For instructions, see Creating an Annex List in this chapter.
2
Click the mouse button on each Annex you want.
You can select as many Annexes as you need. (Some
commands allow you to select only one Annex.) To deselect
an Annex, hold
display Annex information, choose
on any Annex name in the list.
After you create a list, you can use the Setup mode or the Customize mode's
configuration area.
Changing Annex Lists
As you use commands to configure Annexes, you may need to change your
original Annex list. You can change or verify list items at any time by using
specification area buttons.
Add
Remove
Annex Info
select.
Adding to a List
To add an Annex to a list:
1
Enter an
If you use the default community string (
to complete this field.
2
Click
The device you entered appears in the Annex list box.
4-8
and click on any highlighted item. To
Ctrl
adds an Annex to the existing list.
removes one or more devices from the list.
displays basic information about any Annex you
name and a community string.
Annex
or press
Add
CSMIM/Micro-CS Management Application Guide
Annex Info
public
.
Return
or double click
) you do not need
Advertisement
Table of Contents
