W
ARNING
Understanding the IP Window
This window allows you to view and change IP addresses and interface
routing information for the Annexes you selected.
Internet Address
address contains four 8-bit fields separated by periods. Each
field contains a number ranging from 0 to 255 or a hexadecimal
number. The IP address always displays in decimal notation.
You can use this field only when you select a single Annex in
the main window.
Subnet Mask
display is based on the network portion of the Annex's IP
address. Entering an incorrect
problems.
The
Interface Routing
Accept RIP version
accepts. You can enter:
CSMIM/Micro-CS Management Application Guide
Figure 11-2. IP Window
defines the Annex's IP address. This 32-bit
contains the IP subnet mask. This field's initial
box allows you to specify RIP versions.
controls the RIP versions that an Annex
Using the IP Window
can cause routing
Subnet Mask
11-3