Resetting An Annex - Cabletron Systems CSMIM-T1 Administrator's Manual

Entering Port and Modem Information
If you choose the
complete the field located below the Reset Options box.
Entering Port or Modem Numbers
To choose a port type and port numbers or an internal modem name:
1 Hold the mouse on the option button that displays
If you chose
Printer Port(s).
displays
DS1 Line(s)
2 Highlight the selection you want and release the button.
If you chose
an option here. If you chose
3 Enter one or more port, line, or modem numbers in the field.
To enter specific ports or modems, separate numbers with
commas or indicate a range of numbers using dashes. For
example, you might enter
to specify ports 1 through 3 and port 8.
Using Push Buttons
uses the following push buttons:
Reset
Apply
selected.
Help
Close

Resetting an Annex

Using the Reset Command
To reset an Annex:
1 Create an Annex List and select one or more Annexes.
2 Select
Reset
CSMIM/Micro-CS Management Application Guide
or
Individual Port
Individual Ports
If you chose
. If you chose
Internal Modem(s)
.
Individual Internal Modems
activates the
displays a window that explains the
removes the
from the Configure menu.
Resetting Annex Configurations
Individual Internal Modem
, the menu displays
Individual Internal Modems
PRI Line
, you do not have to select
, displays automatically.
PRI Line 2
, ,
to specify three ports, or
1 3 8
command for the Annex you
Reset
window from your display.
Reset
option, you must
Async Ports
, and
Async Port(s)
, the menu
, the menu displays
1-3, 8
command.
Reset
.
16-11