To use the Discovery tool:
Add the following lines to the #MAPPINGS section:
Annex3
Micro Annex
Annex-II
Running Annex Manager
You can run Annex Manager after you install the application and set
environment variables:
Type
at the shell prompt.
gui_am
If you did not set a path, type
type the full path.
A window appears that informs you about the initialization process.
When the initialization process ends, this window disappears and you can
use Annex Manager.
CSMIM/Micro-CS Management Application Guide
component.annex3
component.microannex
component.annexII
cd <install directory>/bin
is a script file that sets environment variables and
gui_am
runs Annex Manager's
not invoke
gui_am_exe
Figure 1-1. Initialization Window
Running Annex Manager
and then type
executable. You should
gui_am_exe
from the command line.
or
gui_am
1-9