Configuring Pri Internal Modems; Displaying The Set Pri Internal Modems Window - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 16 Booting and Resetting Annexes
Your message can use up to 128 characters in any number of
lines.
5 Choose
Annex Manager sends your message to all users connected to the
Annexes you selected.
Configuring PRI Internal Modems
The
PRI Internal Modems
of one or more internal modems for an ISDN Primary Rate Annex. This
section includes:

Displaying the Set PRI Internal Modems Window

Understanding the Set PRI Internal Modems Window
Changing Internal Modem Status
Displaying the Set PRI Internal Modems Window
Displaying the Window
The
Set PRI Internal Modems
display the window:
1 Create an Annex list in the main window.
For more information about Annex lists, see Saving and
Opening Annex Lists on page 4-13.
2 Select one or more Annexes from the list.
3 Move the pointer to the Configure menu and choose
.
Modems
The window appears (see Figure 16-6).
The following example shows the
16-16
.
Apply
command allows you to select and change the status
command appears in the Configure menu. To
Set PRI Internal Modems
CSMIM/Micro-CS Management Application Guide
PRI Internal
window.