Cabletron Systems CSMIM-T1 Administrator's Manual page 301

This section lists all Annex parameters eligible for configuration using
Annex Manager. Parameters appear in alphabetical order. For each
parameter, you can find:
A brief description of the parameter's function.
An explanation of dependencies, if they occur, among
parameters.
References to additional information in other Annex
documentation.
A list containing the parameter's type, allowable values, default
value, and the Annex Manager lists in which the parameter
appears.
a_router
defines the Ethernet address that the Annex attempts to use as the
AppleTalk router address. If the router does not respond, the Annex listens
for an RTMP packet and uses the address in the packet as the new router
address. You can enter
Type Annex
Values 0 to 253
Default 00-00-00-00-00-00
Lists Annex Only, AppleTalk
acp_key
defines the encryption key used to exchange messages between the Annex
and the security server. You can use this parameter only when the
parameter is set to
enable_security
CSMIM/Micro-CS Management Application Guide
CHAPTER 19
ANNEX PARAMETERS
Each parameter description includes an
Annex Manager default value. If you use the
Site Parameters
values in help messages, the values listed in this
section will not agree with your help messages.
Remember that
if you do not enter a parameter value, the Annex
continues to use the default values listed here.
to direct the Annex to find the router.
0
enabled
command to change default
changes help text only:
Site Parameters
and a security server is defined. The
19-1