Using Push Buttons - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 17 Displaying Status Information
Packets Transmitted
packets sent.
Packets Dropped Received
packets dropped on transmit.
Packets Dropped Transmitted
packets dropped on transmit.
The
Dropped Packets Info
Bad Checksum
received with bad checksums.
Un
derstanding the Tunnel Information Box
The
Tunnel Information
includes the following categories:
Device Type
terminates.
Interface Protocol
lists the state of the tunnel. Values are
State
or
deregistered.
Login Time
Home Addr
Home Addr category is protocol specific.
Home Agent Addr
WAN Type
network.
.
WAN Addr
(displayed

Using Push Buttons

The
Annex DVS Status
Save Output
includes the default text directory. You can enter a file name in
17-34
provides a count of the number of GRE
provides a count of the number of GRE
provides a count of the number of GRE
box provides information in the
provides a count of the number of GRE packets
box displays data about all active tunnels. This box
lists the interface device to which the tunnel
list the protocol used on the connection.
lists the time the user logged in.
lists the address assigned to the remote node. This
lists the IP address of the Home Agent (HA).
lists the type of WAN interface from the HA to the home
lists the address of the home network from the HA
ad hex).
window uses the following push buttons:
displays the standard
CSMIM/Micro-CS Management Application Guide
Bad Checksum
registered, established,
window, which
File Selection
field.