Viewing Script Contents - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 14 Viewing, Creating, and Executing Scripts
own site-specific defaults, since factory default values may not
be appropriate.
Basic_Async_Port
Cmd_Line_Editing
If you use framed protocols (PPP, IPX, etc.), you may want to
leave these parameters at their default settings.
Dedicated_Port
mode.
contains port modem configuration parameters.
Modem
Modem_Internal
for the CSMIM-MODMIM product and other products with
internal modems.
Nameserver
contains port parameters for PPP.
PPP
Printer_Port
Annexes do not have parallel printer ports.
contains Annex and port parameters for routing.
Routing
contains Annex and port parameters for SLIP.
SLIP
contains Annex and port security parameters.
Security
contains Annex syslog parameters.
SysLog
contains TMux protocol parameters.
TMux
contains port parameters for tn3270.
TN3270
Time_of_Day
VCIInterface
parameters. If you do not use the DecServer interface, you
should leave these parameters at their default settings.
Virtual_CLI

Viewing Script Contents

The command displays the contents of any existing script. You
View Script
can use this command to determine whether you need to create a new
14-2
contains basic asynchronous port parameters.
contains the terminal port editing parameters.
contains port parameters for dedicated port
contains port modem configuration parameters
contains nameserver parameters.
contains port parameters for a parallel printer. Some
contains Annex timeserver parameters.
contains a port's DecServer user interface
contains virtual CLI parameters.
CSMIM/Micro-CS Management Application Guide