Table of Contents
Advertisement
Chapter 16
Booting and Resetting Annexes
All Printer Ports
All Virtual Ports
All T1 DS1 Ports (Hard)
T1 Drop/Insert interface and modem sessions
All T1DS1 Ports (Soft)
only on DS0 channels that have been changed.
All T1 DS1 ESF Counters
All Interfaces
All Internal Modems
Individual Ports
button below the
in the adjacent field.
Individual Internal Modems
enter in the option button below the
modem numbers you enter in the adjacent field.
resets entries used for dialing out from a Unix host to a
Dialout
remote node over a port in slave mode.
resets LAT (Local Area Transport) parameters. When you
LAT
use this option, existing connections keep their current values:
new parameter values apply only to LAT connections
established after you use
resets macros after you customize them in the Annex
Macros
configuration file.
Message of the Day
when you establish a connection to an Annex.
External Modem
PRI Line
PRI Sessions
configuration file for an ISDN Primary Rate Annex's session
Name Server
Annex's ability to translate addresses to names.
resets security parameters.
Security
16-10
resets the parallel printer ports.
resets the virtual connections.
resets the T1 engine and terminates the
resets parameters and will disrupt service
resets all T1 engine statistics.
resets the interface parameters.
resets entries for internal modems only.
resets only the port type you enter in the option
Reset Option
resets one or more internal modems you
resets the file for the message that appears
s resets modem entries for external modems only.
resets a PRI line for an ISDN Primary Rate Annex.
reloads session parameter blocks in the
resets the parameters and host table that control an
CSMIM/Micro-CS Management Application Guide
box and the port numbers you enter
Reset Option
.
Reset
.
box and the
Advertisement
Table of Contents
