Table of Contents
Advertisement
Chapter 20 Troubleshooting
Resetting Modems
If you encounter problems resetting modems using the
commands or
Reset
the Modem windows in the Setup mode, increasing the SNMP timeout
values may alleviate this problem.
Boot Status
Annex Manager does not automatically update the current status of each
Annex (e.g.,
) when you attempt a boot operation. You must
NOT REACHABLE
select
from the Status menu to determine the current status.
Verify Annex State
MOP Issues
If the Annex has booted from a MOP host, the Annex Information window
shows the boot host address as 0.0.0.0.
20-6
CSMIM/Micro-CS Management Application Guide
Advertisement
Table of Contents
