Editing Script Files; Changing Parameter Values Using Scripts - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 14 Viewing, Creating, and Executing Scripts
The
Script File Selection
you to:
Overwrite an existing script that you created previously by
selecting its name. When you select an existing script name,
a window appears that allows you to verify your choice. You
cannot overwrite a script that someone else created.
Enter a new script name.
When you choose
the name you specified.

Editing Script Files

You can use an ascii editor to change saved script files. Annex Manager
verifies each file according to its first four lines. When you edit these files,
you must use Annex Manager conventions. Script files always begin with:
#
# DB_VERSION: V1.0
# FORMAT: Parameter Name | Port Type | Port Number | Value
#
For example, you might enter
in the
0
A port or channel number or an asterisk (to specify a wildcard
port) in the
, ,
Asy ptr eth
in the
Port Type
Comment lines as long as each line begins with
Manager processing ignores these lines.
For detailed information about each parameter's values, see .

Changing Parameter Values Using Scripts

You can use any existing script to reconfigure one or more Annexes. The
command applies a script's values to the Annexes you select.
Execute Script
This section includes:
14-12
window displays the default script directory. It allows
, Annex Manager creates a new script with
OK
lock_enable| none | 0 | enabled
field when you select non-port parameters.
Port Number
field.
Port Number
, (for DS1 ports) or
2
field.
CSMIM/Micro-CS Management Application Guide
(for
none All Annex Only
. Script files accept:
parameters)
. Annex
#