Table of Contents
Advertisement
Chapter 3 Working with Annex Manager Windows
Annex Only List
parameters.
Async Port List
Printer Port List
Enet Port List
DSO Channel List
DS1 Line List
When you choose a list, the box below this button displays all parameters
included in the list. You can select a single parameter from this list.
Understanding the Default Value Area
The window's right-hand side displays current default values and lets you
enter a new default value for help messages and for the
Before you select a parameter, the small box at the top of the
window displays
its name appears here.
The
AM Default
parameter you chose. The Annex retains this value as its
default, regardless of the changes you enter with this
command.
The
Site Default
parameter you chose. Again, this value appears only in the
parameter's help message and in the
select the
used for processing.
Using Push Buttons
The
Site Parameters
Apply
that appears in the help message and in the
You can press
the box to check your work.
3-18
to display all parameters, excluding port
to display asynchronous port parameters.
to display printer port parameters.
to display Ethernet port parameters.
to display DS0 channel parameters
to display DS1 line parameters.
nothing selected
area displays Annex Manager's default for the
field allows you to enter a new value for the
button. It does not change the value
Verbose Output
command uses the following push buttons:
activates the command, changing the default value
Apply
CSMIM/Micro-CS Management Application Guide
. When you choose a parameter,
Show
and click twice on the parameter in
command.
Show
command if you
command.
Show
Advertisement
Table of Contents
