DEVICE/BOARD/PORT COUNTERS
Total errors are further broken down into the following categories:
•
Out of Window Collisions
•
Runt Packets
•
No Resources Available
•
Frame Alignment Errors
•
CRC Errors
•
Giant Packets.
In addition to viewing the above-mentioned information, the
DEVICE/BOARD/PORT COUNTERS screen allows you to perform the
following functions:
•
Reset all counter information associated with the MMAC to 0
•
Enable or Disable an individual board
•
Enable or Disable an individual port
•
Enable all ports
•
Configure port association.
You can also view Third-Party MIMs using the DEVICE/BOARD/PORT
COUNTERS screen. Device statistic counters for the whole MMAC
include Third-Party MIM activity for Bytes Received, Packets, and Errors
as well as the board and port statistics for these categories. Only Port 1
displays the Third-Party MIM data, providing statistics for all port
activity on the board. Command options that function with Third-Party
MIMs are: EXIT, BOARD X, PORT X, and RESET COUNTERS.
3.1.1
Displaying the Desired Board/Port
When the DEVICE/BOARD/PORT COUNTERS Screen first appears, it
displays Device (IRM2), Board 1, and Port 1 information.
To view counter information for another board or port:
1. Using the arrow keys, highlight the desired option, BOARD X or
PORT X, at the bottom of the screen.
2. Press the shift and + keys (increase), or just the - key (decrease), until
reaching the board/port number you wish to view.
3. Press Return. Counter information associated with the selected
board/port appears.
3-2