Chapter 8
Setting ISDN Primary Rate Annex Values
The
Remote Address
can enter an IP address here.
Using Push Buttons
This window uses
information about push buttons, see .
Assigning Remote Addresses
Assigning Addresses
To assign a remote address to a B-channel:
1
Select a single ISDN Primary Rate Annex in the main window.
2
Display the
3
Select a single channel from the
4
Enter an IP address in the
5
Press
Annex Manager changes the channel's address. The next call
that uses the channel you selected will use the address you
enter here.
Using the T1/PRI Line Window
The
window allows you to set a type of switch provided by the
T1/PRI Line
telephone company for your T1/PRI line. The window displays information
in the
T1/PRI Line
To display the window, select
8-10
field assigns an address to the channel you selected. You
,
Apply
Help
window.
Channels
.
Apply
box.
T1/PRI Line
CSMIM/Micro-CS Management Application Guide
, and
Close
box.
Channels
field.
Remote Address
from the
Setup
buttons. For detailed
field.