Table of Contents
Advertisement
CBU-NM
User Manual
12.12 Speed Menus
To access a Speed Menu, click the right mouse button over any PCNC
window. A group of commands relevant to that window will appear by
the pointer. For example, the commands in the Network Inspector's
Speed Menu relate to the Network Database and Direct connections.
You can select the command from the menu by clicking on it with the
mouse, or by typing the command's short-cut letter (underlined).
12.13 Status bar
The status bar is a grey strip at the bottom of the PCNC Main window. It
displays help messages for PCNC's commands when you move the
mouse over a toolbar button or a menu option.
12.14 Talkwire List
The Talkwire List is a list of local KBU channels that have been
nominated to communicate directly with remote KBU devices.
allows you to access remote devices via the Control Link and therefore
send commands to them, which is not possible using the Remote Link.
For a more detailed description, see Section
12.15 TCP/IP
TCP/IP is a set of network protocols that allows different devices to
communicate with each other. The two most important are the Transport
Control Protocol and Internet Protocol (hence the name). PCNC uses
TCP/IP to connect to devices using the SNMP link (see Chapter 5).
12.16 Trap
A Trap is the SNMP equivalent of an ALERT message.
12.17 Toolbar
Towards the top of the PCNC main window is a toolbar containing a row
of icons and a large alarm symbol, which flashes to announce the arrival
of new alarms. The icons are mounted on buttons.
functions available from the program's menus. If the mouse pointer is
placed over any of these buttons, a description of its function will appear
12–4
ii
- The Talkwire List .
4.5.3
They duplicate
80-60100000-02
This
Advertisement
Table of Contents
