Cabletron Systems CSMIM-T1 Administrator's Manual page 316

Chapter 19 Annex Parameters
CallDef_hardware_tabs
allows an ISDN Primary Rate Annex to convert ASCII tab characters to the
correct number of spaces when a terminal does not support hardware tabs.
This parameter works only for CLI sessions.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_Imask_7bits
allows an ISDN Primary Rate Annex to mask input to seven bits. If you
choose , the Annex expects eight-bit ASCII input.
disabled
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Basic Async Port, Call Defaults
CallDef_inactivity_timer
specifies the number of minutes that an ISDN Primary Rate Annex call can
remain inactive. If the timer expires, the Annex terminates the call. You
can use
CallDef_input_is_activity
call activity. If you set these parameters to
independent of activity. To reset a call regardless of any activity, enter a
number of minutes here, set
to .
disabled
Type Annex
Values 0 to 255 minutes
Default 0 (timer disabled)
Annex Only, Call Defaults, Idle Timer, Modem, Modem
Lists
Internal
19-16
and
CallDef_output_is_activity
CallDef_input_is_activity
CSMIM/Micro-CS Management Application Guide
to define incoming
, the timer runs
disabled
and
CallDef_output_is_activity