Cabletron Systems CSMIM-T1 Administrator's Manual page 356

Chapter 19 Annex Parameters
map_to_upper
allows an Annex to convert lowercase characters sent to a terminal using
CLI into uppercase characters. This parameter is used for older terminals
that do not support lower case characters.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, Command Line Editing
max_chap_chall_
interval
specifies the maximum value for the random CHAP re-challenge interval.
Type Annex
Values 0 to 65535
Default 0 (Off)
Lists Annex Only, Security
max_modem_calls
indicates the number of modem calls for which the Annex keeps accounting
information. You can use this parameter only for RA6100, Cabletron
CSMIM-T1, and Cabeltron MODMIM products.
Type Annex
Values 0 to 255
Default 255
Lists Annex Only, Basic Annex, Virtual CLI
max_vcli
determines the maximum number of virtual CLI connections the Annex can
create at a time. Entering
by the Annex's available memory.
Type Annex
Values 0 to 255
Default 255
Lists Annex Only, Basic Annex, Virtual CLI
19-56
allows a number of connections limited only
255
CSMIM/Micro-CS Management Application Guide