Table of Contents
Advertisement
The
box controls security for incoming ports and allows you to select
Incoming
a PPP security setting.
The
On
set security for the Annexes you chose in the main window.
Calls
If you select the
security server, including security for AppleTalk, CLI, IPX, and
SLIP/PPP connections for the ports or calls you selected.
The
PPP Security Protocol
Annex requires before it starts the network control protocol.
You can select:
None
Pap
Chap
Chap/Pap
Request the challenge-handshake protocol.
Request password authentication protocol if the peer rejects
.
Chap
The
box activates security for modem and non-modem ports:
Outgoing
The
and
On
host-based security for access through the port server. If you
select the
ports.
The
box provides
Host Access
The
On
security that authorizes connections from CLI to a network
host. If you select the
a connection to a host from the Annex based on the
file.
The
box provides
VCLI
The
On
on virtual CLI connections to an Annex. If you select the
CSMIM/Micro-CS Management Application Guide
and
buttons for
Off
button, Annex Manager activates the ACP
On
Modem Ports
ISDN Primary Rate Annexes.
not apply for Annexes with asynchronous
ports.
.
to use password authentication protocol.
to use challenge-handshake protocol.
to:
buttons for
Off
buttons, authorized users only have access to the
On
Restrict
and
buttons for the
Off
On
buttons:
Security
and
for the
Off buttons
Modem Ports, Non-modem Ports
and
Non-modem Ports
box defines the security check that the
and
Modem Ports
buttons:
field activate host-based
Restrict
button, the security server authorizes
field control user validation
Security
, and
do not apply for
PRI Calls
control
Non-modem Ports
acp_restrict
PRI
does
On
10-2
Advertisement
Table of Contents
