Table of Contents
Advertisement
Chapter 1
Installing Annex Manager
Reset commands) you must enter their user names in the user access list. root will be
added to the user access list
automatically.
This is the current access list
root
Do you want to add other names to the user access list (y/n) [y]
Enter user names (one per line) to permit set access.
Type "<CR>", "." or ^D on a line by itself to end.
Enter a? to print the current access list
User name [<CR> to end]
15 Select a color scheme for displaying Annex Manager:
What default color scheme do you want (c=color/m=mono) [c] m
Finishing installation...
Installation complete
To Run Annex Manager, you need to set your environment as follows:
1. If you have changed the recommended installation
directory, set the GUI_AM_DIR environment variable to $PWD.
2. Put the $PWD/bin directory in your path
3. Set the DISPLAY environment to point to the host where you
want Annex Manager to appear.
You can put these commands in your .cshrc, .login, .profile, or some other equivalent
script.
To run the Annex Manager, type 'gui_am' at the shell prompt. Consult the README
file for release information.
When you complete this step, you can set up the environment to run Annex
Manager.
1-6
.
CSMIM/Micro-CS Management Application Guide
Advertisement
Table of Contents
