Cabletron Systems CSMIM-T1 Administrator's Manual page 303

arap_v42bis
allows V.42bis compression during an AppleTalk session.
Type Async
Values enabled or disabled
Default enabled
Lists Async Port, AppleTalk
at_guest
allows guests to log into an AppleTalk session. If you choose
client requests guest access, the Annex asks ACP for username guest
privileges.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, AppleTalk
at_nodeid
specifies the Appletalk hint used by the Annex on a specific port. You can
enter an ID in decimal or hexadecimal notation. Each ID has two parts
separated by a dot:
A network address ranges from 0 to 65534 (0x0000 to
0xFFFE).
A node address ranges from 0 to 255 (0x00 to 0xFE).
For example,
191.253
Type Async, AppleTalk
Values 0 to 65534.255
Default 0.0
Lists Async Port
at_security
turns on ACP service for an AppleTalk session. When you choose
for this parameter and for
information about the client, including authentication, logging, and zone
CSMIM/Micro-CS Management Application Guide
, and
0x00BF.253
enable_security
designate the same address.
191.0xFD
, the Annex uses ACP to get security
and a
enabled
enabled
19-3