Cabletron Systems CSMIM-T1 Administrator's Manual page 339

513
1027
A number between 0 and 65535.
This parameter is obsolete in Annex software Release 10.1 and in
subsequent releases. Please use the
Type Async
Values telnet, rlogin, call or a TCP/IP port number.
Default telnet
Lists Dedicated Port
def_session_mode
defines the default session mode when the DECServer command interface
is configured (i.e., when
please refer to the CSMIM/MicroCS Interface for VMS Environments
Administrator's Guide .
Type Async
Values interactive, passthru, passall, transparent
Default interactive
Lists Async Port
default_image_name
contains the name of the image file that is loaded by default when the Annex
is booted.
Type Annex
Values 0 to 100 characters
Default " " (null string)
Lists Annex Only, Basic Annex
default_zone_list
contains the zone list that is sent to AppleTalk clients in case of an ACP
failure. You must use spaces to separate zone names (e.g.,
). To escape embedded spaces within a zone name, use the backslash
lab
(\). If you do not set this parameter, the Annex provides the network zone list.
Type Annex
Values 1 to 100 characters
Default " " (null string)
Lists Annex Only, AppleTalk
CSMIM/Micro-CS Management Application Guide
for .
rlogin
for .
call
cli_interface
dedicated_arguments
is set to ). For more information,
vci
parameter.
general engineering
19-39