Cabletron Systems CSMIM-T1 Administrator's Manual page 313

If the file does not contain a matching user name, the
Annex uses values from the
parameters:
contacts a DHCP server to request a remote address on
dhcp
behalf of the user.
reads the user's remote address from the
Local
parameter.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, PPP, SLIP, Sync Call Defaults
CallDef_do_
compression
starts TCP/IP header compression on a SLIP link. When you choose
the ISDN Primary Rate Annex negotiates for TCP/IP compression for both
sides of the connection.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Call Defaults, PPP, SLIP
CSMIM/Micro-CS Management Application Guide
The the
acp_dialup
not a local address, the Annex uses the remote
address from the file and the Annex's IP address for
the local address.
If both parameters contain addresses, the Annex uses
these values.
If both parameters are set to
negotiates for both addresses with the remote PPP
client. The connection is denied for a remote SLIP
client.
If contains a value and
local_address
to , the Annex uses the local address and
0.0.0.0
negotiates with the remote PPP client for the remote
address. The connection is denied for a remote SLIP
client.
file contains a remote address but
local_address
0.0.0.0
and
remote_address
, the Annex
is set
remote_address
remote_address
,
enabled
19-13