Table of Contents
Advertisement
Chapter 13 Viewing and Changing Parameters
Do not enter port information and then select a parameter
group or list that requires this information.
Select a port type that does not match one or more parameter
port types. For example, a warning window displays if you
choose
enter a port number that does not exist in a selected Annex.
When information does not match, the warning window informs
you that Annex Manager will not use certain parameters. While
the
Show
continue, message boxes reflect error conditions:
Show
lists all parameters in the work area, but does not
Set
change or show values for parameters with errors.
Understanding Output and Message Box Errors
The
command's output box and the
Show
include error messages about specific parameters. They display errors
when:
Annex Manager cannot read one or more parameters.
You do not mark at least one parameter when you use
Communication with the Annex times out.
You choose
one or more marked parameters. The message box lists all
marked parameters, with error messages for those that could
not change. In addition, the
appears. This message indicates that Annex Manager has
completed
parameters due to error conditions.
13-14
port type and the
Printer
or
windows will appear and the operation will
Set
does not list these parameters.
and the
Apply
processing and has changed some, but not all
Set
If your selections result in the
message, the automatic
errors
displays the original values for parameters
that did not change.
CSMIM/Micro-CS Management Application Guide
Basic_Async_Port
command's message box
Set
operation cannot change
Set
Set complete with errors
group, or if you
.
Set
message
Set complete with
process
Show
Advertisement
Table of Contents
