Chapter 14 Viewing, Creating, and Executing Scripts
Figure 14-8. Execute Script Reset Parameters Window
Identifying Errors
Script commands notify you about error conditions by displaying warning
windows and by listing errors in message boxes. You can encounter errors
based on main window selections or on parameter value limitations. This
section includes:
Create Script Command Errors
Execute Script Command Errors
Create Script Command Errors
displays warning windows if you:
Create Script
Use the
one Annex, and do not select an Annex and a main window
parameter option.
Select an option that does not match the Annex or parameters
you select in the main window. For example, a warning
appears if you select the
Annex that does not have synchronous port parameters.
Use the
channel information for parameters that require this
information.
14-18
Main Window Parameters
Main Window Parameters
CSMIM/Micro-CS Management Application Guide
option for a list with more than
All Sync Port Parameters
option and do not enter port or
option and an