Table of Contents
Advertisement
Chapter 17
Displaying Status Information
, flow control is not allowed.
Stop
None
Unknown
In Chars
port.
Out Chars
each port.
Session Number
that are connected, connecting, or disconnecting.
Oper Status
control. If this field displays:
, the port is functioning normally.
Up
Down
Active
Current User
selected.
Login Time
according to the Annex clock.
Port Proto
can display the following codes.
indicates that this is a CLI port opened by a device
Cli
connected to the port or by a connection from a host as a
virtual CLI.
psvr
vcli
defines a dedicated port.
dp
indicates that the port is using the Annex line printer
lpd
daemon.
ppp
slip
arap
17-8
, flow control is not applicable for this port.
, the flow control status cannot be determined.
displays the number of characters received by each
indicates the number of characters transmitted from
provides the number of open sessions on the port
shows a port's operational state independent of flow
, the port is not functioning.
, the port is up and has a user logged in.
identifies the user logged in to the ports you
displays the day and time that the port was opened
defines the protocol that is active on a port. This field
indicates that this is a slave port.
indicates that this is a virtual port.
indicates that the PPP protocol is active.
indicates that the SLIP protocol is active.
indicates that the ARAP protocol is active.
CSMIM/Micro-CS Management Application Guide
Advertisement
Table of Contents
