Using Push Buttons; Selecting Security Window Settings - Cabletron Systems CSMIM-T1 Administrator's Manual

button, the Annex uses the same user name and password
validation for virtual CLI connections as it does for CLI security.
appears. In this case, the
If you change all security settings in this window to
Manager deactivates security but does not change the
enable_security

Using Push Buttons

The window uses the
Security
push buttons. For detailed information about these buttons, refer to .

Selecting Security Window Settings

Selecting Settings
To select new security settings:
1 Display the
2 Select new settings.
If the
Security
Non-modem Ports On
parameter was set to
Annex Manager deactivates security but does not change the
enable_security
3 Press
The
Reset Parameters
Auto Reset
you changed require Annex Manager to reset Annexes. If you
did not select
without notifying you.
CSMIM/Micro-CS Management Application Guide
I f the Annexes you chose currently use this security
system, the
On
, and
Restrict Security
parameter setting.
window.
Security
window first appears with the
and
Off
enabled
setting.
.
Apply
window appears if you selected the
option from the pull-down menu and if the settings
Confirm Auto Reset
button for
Modem Ports
will be selected when this window first
parameter is set to
enable_security
,
Apply Restore
buttons selected, the
. If you select either
, Annex Manager resets Annexes
,
Non-modem Ports
, Annex
Off
, , and
Help
and/or
Modem Ports
enable_security
button,
Off
Confirm
,
.
enabled
Close
10-3