Cabletron Systems CSMIM-T1 Administrator's Manual page 399

refer to the CSMIM/MicroCS Interface for VMS Environments
Administrator's Guide .
Type Async
Values enabled or disabled
Default disabled
Lists Async Port
vci_login_timeout
enables a login timer when the DECServer command interface is
configured (i.e., when
refer to the CSMIM/MicroCS Interface for VMS Environments
Administrator's Guide .
Type Async
Values enabled or disabled
Default disabled
Lists Async Port
vcli_groups
specifies which remote group code is assigned to virtual CLI users. All
virtual CLI users have the same group code. You can enter
all groups,
none
commas (e.g.,
(e.g.
1, 5, 200-255
Type Annex
Values all, none, numbers between 0 and 255
Default none
Lists Annex Only, LAT
vcli_password
defines a password required for virtual CLI connections to the Annex and
as a back-up to host-based security. This parameter serves as host-based
security backup: the Annex requests a password on a virtual CLI connection
if the security server does not respond. For local password protection, you
CSMIM/Micro-CS Management Application Guide
cli_interface
to disable all groups, a series of numbers separated by
, , ), or a range of numbers separated by dashes
1 5 7
).
is set to ). For more information, please
vci
to enable
all
19-99